The SRAM Cell Design is a VLSI & MATLAB project that combines Design report and Floorplanning, built with SPICE simulation. The project follows a clean, modular design flow where specification, implementation, and verification stay separated, making it easy to test, extend, and present. It showcases practical VLSI and simulation techniques while producing a working, demo-ready design.
Manual and traditional approaches to this design task are slow, error-prone, and difficult to verify. Without a structured VLSI or simulation approach built on Floorplanning and SPICE simulation, designers cannot model, implement, and validate complex circuits or algorithms reliably.
This project applies VLSI and simulation techniques through Design report, orchestrated with SPICE simulation and Floorplanning. The flow is designed for correctness and clarity, with clear implementation, verification, and evaluation stages. It produces consistent, reusable results and can be adapted to related design tasks with minimal changes.
SPICE simulation
Cadence / Synopsys
Verilog / VHDL / MATLAB
Simulation and synthesis tools
Testbenches and verification
Timing and power analysis
Verilog / VHDL
Synthesis tools
Modular design flow around Design report and Floorplanning
Configurable parameters and verification settings
Clear logging, metrics, and error handling
Clean interface for viewing results
Reusable components for related design tasks
Comprehensive verification and evaluation
The project is layered: the specification layer defines the design through Design report; the implementation layer builds it with SPICE simulation and Floorplanning; and the verification layer validates and presents results via Timing closure. Shared test, analysis, and reporting modules support all layers, keeping the design robust and easy to extend.
Study the specification and define the design goals.
Build the specification and modeling layer with Design report.
Implement the core design using SPICE simulation and Floorplanning.
Add the verification and presentation layer via Timing closure.
Wire up end-to-end flows and add error handling and reporting.
Run simulations, analyze results, and refine the design.
Package the project, document it, and prepare the demo and viva report.
Build production-style VLSI and simulation designs
Apply RTL synthesis and Placement and routing
Model and implement digital and analog systems
Work with VLSI, FPGA, and MATLAB tools
Present and defend a complete project in viva
Extend the design to advanced process nodes
Add more sophisticated algorithms
Improve power and performance optimization
Integrate hardware-software co-design
The SRAM Cell Design delivers a complete VLSI & MATLAB workflow — from specification and implementation to verification and presentation. It is practical, modern, and easy to explain, making it an excellent final year project that demonstrates in-demand VLSI and simulation skills.
